EURO POLYMERS UP-266 TOP COAT / UV Resistant 2 Components Coating

Contact

Origin: VIETNAM

Packing: 18 Kg/Set (Pail A: 16kg, Pail B: 2kg)

EURO POLYMERS UP-266 TOP COAT

UP-266 is a 2 components Polyurethane topcoat, UV stabilize and chemical resistance, good elongation and elasticity.

APPLICATION RANGE

Topcoat for waterproofing layer such as Polyurethane, Hybric, Polyurea, PU foam ...

FEATURES & BENEFITS

SURFACE PREPARATION

The substrate should be dry, clean and free from laitance, oil, dust, paint residues, algae, loose and friable material must be completely removed from all surfaces before application of the product

MIXING

UP - 266 is a two component Polyurethane product and supplied in 2 parts with mixing ratio A: B = 8 : 1, mixed using paint mixer for 3-5 minutes until a homogeneous mixture is achieved.

APPLICATION

UP-266 can be applied by brush, roller, steel and air spray.
Leave the 1st applied coat 4-24 hours then apply 2nd coat to ensure the good bonding between coats.

TECHNICAL DATA

Product type	2 component Polyurethane
Color	Green, Grey,... (mixture)
Viscosity (cps, 25°C)	A: <1,000; B: <50
Density (g/ml)	1.0 ± 0.05 (mixture)
Mixing ratio (by weight)	A : B = 8 : 1
Dilution	Thinner 18, 10-20%
Consumption	0.25-0.30 kg/m²/2 coats
Application condition	Temperature: 5-35°C Humidity: ≤ 85% RH
Shelf life	12 months (30°C)
Application method	Rolling, sweeping, spraying
Dry time (30°C, 80% RH) Depend on temperature and air humidity	Overcoat time: 4 - 24 hours Completely dried ~ 12 ± 5 hours Pot life: 1-2 hours