EURO POLYMERS EP-200 PRIMER/ Solvent-Based Epoxy Primer

Origin : VIETNAM

Packing : 20 Kg/Set ( Pail A: 16 kg ; Pail B: 4 kg)

EURO POLYMERS EP-200 PRIMER

EP-200 Primer is the solvent based, two component, clear Epoxy primer. Deep penetrate property especially for concrete floor, improve surface hardness and provide a good bond to the finished coatings

APPLICATION RANGE

  • Primer for finished coatings to concrete, screed, steel, ...surfaces
  • Product has good abrasion and impact resistance for a long time, so it is also used as a clear dust-proof coating for light and medium load industrial floors

FEATURES & BENEFITS

  • Low viscosity, easy to apply (paint brush, roller, spray)
  • High adhesion, fast drying
  • Improved resistance to mechanical impact to floors
  • Cured to form a barrier against solvent, alkali, oil, grease, salt and humidity

PREPARATION

  • Concrete substrate must be dried after 28 days or compressive strength ≥ 25 N/mm²
  • The substrate should be clean and free from laitance, oil, dust, paint residues, algae, loose and friable material must be completely removed from all surfaces before application of the product
  • Surface humidity must be ≤ 80% RH

MIXING

  • Mix 2 components of EP-200 Primer thoroughly using paint mixer for 3-5 mins until a homogenous mixture achieved 

APPLICATION

  • Apply EP-200 Primer to surfaces, wait for 2-4 hours till it dried prior application of finishing coat
  • Clean all application tools using Thinner 20 before it cures

CONSUMPTION

  • 0.15 – 0.20 kg/m², 2 coats are required
  • The coverage might vary depend on the substrate absorbent 

TECHNICAL DATA

Product type Solvent based, 2 component epoxy primer
Color transparent
Waterproof (cured) workable
Substrate moisture ≤ 80% RH, test method: moisture meter
Density ~ 0.93 kg/ltr (mixture) 
Solid content 40 ± 5%
Application temperature A : B = 4:1
Application Temperature Air: 5 - 35°C
Surface: < 40°C
Relative humidity: ≤ 80% RH
Dilution Not recommended
Apply method Paint brush, roller, spray
Theoretical coverage 0.15 ~ 0.2 kg/m²
Dry time (depend on temperature and relative humidity) 20°C, 80% RH
Application time: 2 hours
Touch dry: 1 hour
Recoats: 2-4 hours
Walkable: 1 day
Lightly receive physical load: 3 days
Fully chemical cured: 7 days   
0965.946.943
popup

Qty:

Total: