EURO POLYMERS ZP-300 PRIMER
ZP-300 Primer is two component, Polyamide Epoxy and anticorrosive zinc phosphate. Product is primer for special project with good adhesion, waterproof, good resistant to oils other chemicals. Form an excellent anti-corrosion coating to protect hulls, steel structure, galvanize, inox, and a primer for oil tanks
APPLICATION RANGE
- Designed to resist corrosion on steel, marine, structures in architecture, underground piping system, machinery, equipment, storage tanks, ...
- Food processing plant, chemical factory, ship protection coating
- Used to repair rusted metal surfaces
FEATURES & BENEFITS
- Chemical resistant
- Withstand the severe weather, improve adhesion for finish coating
- Excellent moisture resistance
- Anticorrosion
- Excellent solvent resistance
- Abrasion resistance
PREPARATION
- The substrate should be clean and free from laitance, oil, dust, paint residues, algae, loose and friable material must be completely removed from all surfaces before application of the product
- Sandblast surfaces according to ISO 8501-1:2007 (SA 2.0 or SSPC-SP10) or grind according to ISO 8501-1 (ST3 or SSPC-SP3)
- After surface treatment is completed, necessary to remove all dirt, grease
- Metal: must be primed before coating
- Suitable coating: PU Coating
CONDITIONS OF APPLICATION
- Surface temperature must be at least 3°C above dew point
- The ambient temperature ≤40°C and humidity ≤80% RH
- In enclosed area, it must be well ventilated to ensure safety and explosive
APPLICATION TOOLS
- Standard spray machine: nozzle size: 0.017”-0.019”
- Air pressure spray machine: 2500 psi (176 kgf/cm)
- Roller: use a dedicated roller
- Paint brush: for small spaces, edging, corners, patching, ...
MIXING
- Mix 2 components of ZP-300 Primer thoroughly using paint mixer for 3-5 mins until a homogenous mixture achieved
- Dilution: Thinner 30
- Note: dilute with 20-30% thinner depend on the film thickness of coating and application method
- Clean all tools right after finish of application using Thinner 30
THEORETICAL CONSUMPTION
-
4.52 m²/ltr/coat, wet film thickness (WFT) = 221µm, dry film thickness (DFT) = 135µm
The coverage might vary depend on the surface, film thickness, application method
SYSTEM RECOMMENDED
*Metal surfaces
Product |
Number of Coat(s) |
Dry Film Thickness (µm) |
ZP-300 - Primer |
1 |
135 µm |
PU - Polyurethane coating |
2 |
100 µm |
TECHNICAL DATA
Product type
Color
Density (g/ml)
Solid content (%) |
2 components, Zinc phosphate epoxy primer
Grey (mixture)
1.35 ± 0.05 (mixture)
61 ± 1%
|
|
|
|
|
|
|
|
|